How to Update your Infinix Hot 3 X553 to the Latest XUI

All infinix Zero 3 users, Infinix team
has finally release an update for your device XUI 1.Z.3.2. based on Android
L 20160330. The following functionalities is what you should expect from the ROM.



Features Of Infinix Zero 3 New XUI Update

==> XUI updated to 1.Z.3.2.
==> Added gyroscope function.
==> Added screen recording function.
==> Added weather app.
==> Added shutdown confirm option.
==> Optimized mobile overheating during charging.
==> Improved system stability and performance.


How To Flash XUI Update On Infinix Zero 3 Devices

Note
I will advice you to backup your phone data before you carry out this flashing process. Also make sure you follow my guide carefully as i won't be blamed
if you cause any damage to your device as a result of wrongful application of the procedures below.


For X552-A1-L-20160330 version
==> Download Infinix Zero 3 OTA here
==> Download TCard here
==> Download XFlash here


For X552-B1-L-20160330 Version
==>Download OTA here
==> Download TCard here
==> Download SP Flash here




Note:
If you haven’t rooted your device before, and you still have your stock recovery in place, you can download the OTA or TCard version and flash through recovery. But if your device is rooted and you have TWRP recovery install on your device, then it’s advisable you use SP Flash to flash the rom.



How To Upgrade Infinix Zero 3 XUI Update Via TCard

==> Place the Tcard update you
downloaded on your SD Card (It
shouldn't be kept or saved i any folder)

==> Power off your device

==> Now boot into the bootloader by
holding the Power Button + Volume Up
until the startup logo appears, then
leave the Power Button Only and you
should see the android logo.

==> Again, long-press the Power
Button for about 3 seconds, then
simply press the Volume Up button
this time around without releasing the
power button till an image like this
appears.

==> Remember whenever you want to
navigate around in this mode, you will
make use of Volume Up ⬆ or Down ⬇ buttons so use Volume Down to
navigate to "Apply update from sdcard"
and tap the power button 🔲 to select it.

==> You will be welcomed into a new
interface just as you can see from this
image.
Now utilize the Volume down ⬇ button
to navigate to Tcard update and simply
tap the power button to select it

==> At this point, the installation
process will start and when it is done,
you will see a screen like this. Just
reboot your phone and you are all done.
Remember that the rebooting process
could take up to 8 minutes so there is
no cause for alarm. Relax and wait
patiently for it to complete.



For guide on how to install via SP Flash tool , click here.
If you are confuse, kindly let us know via the comment box.

We appreciate you for reading Teeloadeders, but we think it will be better you like our facebook fanpage and also follow us on twitter below.
Follow @Teeloadedblog

Are you an artiste? Do you want your music to go viral and reach a large number of audience? Promote your music on TEELOADED by clicking here. You can also advertise your product or brand by clicking here.